Eclipse DLTK and Ruby Fast Debugger

I'm trying to debug Ruby scripts with Eclipse (DLTK installed) on a Windows Vista x64 machine and Ruby 1.92 environment.

I installed ruby-debug19, ruby-debug-base19, ruby-debug-ide19 gems, but I still can't debug Ruby scripts with Eclipse. dlt it says the following,

Debugging Engine not started The 'Fast Ruby Debugger (ruby-debug)' is selected, but the 'ruby-debug' gem doesn't seem to be installed in the selected Ruby Interpreter (C:\Ruby192\bin\ruby.exe)

I also added the c:\Ruby192\lib\ruby\gems folder to the system library paths of the Ruby interpreter settings in Eclipse.

How do I fix this problem?

-------------Problems Reply------------

On Linux, I had to do the following:

$ gem install ruby-debug
$ gem install ruby-debug-base
$ gem install ruby-debug-ide

Might this also work on Windows (perhaps through cygwin or cmd.exe)?

Do you install ruby-debug-ide with DevKit?

Check this article for setup debug in Aptana. Although Aptana is base on eclipse, I'm not sure if this can work. Wish you good luck.

And you have to require environment.rb at the top of the file to be debugged also.

Check the version you have installed. The Ruby 1.92 environment is compatible with 64 bit. If yes, then check the Eclipse too - whether it is of compatible for a 64-bit machine as it sounds a bit like a conflict problem.

Category:ruby Views:0 Time:2011-05-17

Related post

  • Cannot install Fast debugger in Netbeans 6.8 for Ruby 1.9 2010-05-27

    I am using Netbeans 6.8 version and Ruby 1.9.1 installed on Windows XP. I tried to install the fast debugger and I am getting the following error. Building native extensions. This could take a while... ERROR: Error installing ruby-debug-ide: ERROR: F

  • Trouble in installing fast debugger on Netbeans IDE 6.9 for rails 3.0.1 2011-06-01

    I am trying to install the fast debugger on netbeans IDE in ubuntu natty narwahl.I am receiving this error.How can i fix this? Building native extensions. This could take a while... ERROR: Error installing ruby-debug-ide: ERROR: Failed to build gem n

  • Ruby visual debugger run from linux terminal 2011-09-06

    Is there a ruby visual debugger that i can run from the linux terminal? And if so, how do i run it? --------------Solutions------------- There are several graphical debuggers available for Ruby, e.g Mr. Guid, rudebug or the RubyMine IDE, the latter o

  • installing eclipse + dltk 3.0 on windows 2011-10-17

    Can someone provide instructions on how to install eclipse + DLTK 3.0 on windows? I can only find 2.0 in the Help/Install New Software... area, and installing it manually is confusing. --------------Solutions------------- If you are only seeing versi

  • debugging ruby with eclipse dltk 2011-04-19

    I'm trying to debug ruby scripts with eclipse helios (dltk installed) on a win7 x64 machine and ruby1.92 environment I installed ruby-debug19, ruby-debug-base19, ruby-debug-ide19 gems but still can't debug rb scripts with eclipse dlt it says followin

  • Are there any standalone Eclipse plugins for Ruby like PyDev for Python? 2011-10-06

    I can install PyDev for Eclipse and have pretty good Python IDE without any vendor preconfigurations. But surprisingly, I can't find a similar standalone IDE plugin for Ruby! Same company that supports PyDev, Aptana, offers something called "RadRails

  • Interfacing Eclipse Workbench UI with GNU debugger functions 2009-06-08

    I want to know how the Eclipse Workbench UI communicates with the GNU debugger. What I mean is in the Eclipse for C/C++, when we press the step over or resume or continue buttons in the menu, what happens behind the scenes? As in how is the GNU gdb i

  • How to install Eclipse + PHP Development Tools (PDT) + Debugger on Mac in The Year 2011 2010-03-16

    I had a lot of trouble installing Eclipse and PDT on my system. It took two days, largely because all the tutorials I could find were out of date (written in 2008, it's 2011 now) and various steps they included were no longer necessary, broken, or ir

  • How to make the eclipse IDE to build faster 2010-05-21

    I am using Eclipse for development. However, it's is taking too much time to build. It hangs when the percentage of build gets to 78. It shows "refreshing workspace" several times. That eats up lots of time. How can I make Eclipse faster? -----------

  • ruby fast reading from std 2010-07-26

    What is the fastest way to read from STDIN a number of 1000000 characters (integers), and split it into an array of one character integers (not strings) ? 123456 > [1,2,3,4,5,6] --------------Solutions------------- This should be reasonably fast:

  • How to debug PHP application using Eclipse PDT (xdebug and zend debugger) 2010-08-25

    I'm working on one application. I am using Eclipse php Helios IDE for developing php application. I wanted to know below things related to this IDE, so that i can implement PHP application instantly as well as very efficiently : 1) How to do remote d

  • Eclipse DLTK: Adding wizards to the 'New' menu of ScriptExplorerPart 2011-03-24

    I'm trying to add a wizard entry to a ScriptExplorerPart of the Dynamic Languages ToolKit for Eclipse. The wizards are accessible from File->New->Other..., so at least I know they work. They are added using the extension point

  • Syntax Highlighting: How Does Eclipse Do It So Fast? 2011-08-30

    I've developed a syntax highlighter in Java for Android and it's working well, but the problem is it can be slow with big files. So I'm wondering how source code editors like Eclipse and Gedit (Ubuntu) highlight what you've just wrote so quickly. For

  • Eclipse DLTK: JDT-like behaviour of parsing and managing files in a project 2011-11-20

    i'm developing a plug-in for eclipse using the DLTK framework. This question was asked on the official mailing list but is unanswered yet, so i want to make it more public. in my DLTK plug-in, as for now, files are only parsed when the editor is open

  • Ruby: Fast way to filter out keywords from text based on an array of words 2011-07-26

    I have a large text string and about 200 keywords that I want to filter out of the text. There are numerous ways todo this, but I'm stuck on which way is the best: 1) Use a for loop with a gsub for each keyword 3) Use a massive regular expression Any

  • Ruby, fast array manipulation when rendering to page 2011-09-09

    So I have some big arrays that need to be output to my views as JavaScript arrays, I'm sure this is a pretty typical challange, but say I have the following ruby object: [ {"timestamp"=>2011-09-07 20:45:00 UTC, "count"=>425.0}, {"timestamp"=

  • How to let ruby/rails debugger only jump into application codes 2012-01-09

    When doing Rails development, and shen using debugger it often happens that step leads to library code, is there a way to restrict it only jumping into my application's code? Thank you very much --------------Solutions------------- Instead of using s

  • How to combine cdt,pdt, dltk in eclipse in linux? 2009-09-24

    1. Okay this is probably lame question, but I haven't found good result searching the web. I want to combine cdt,pdt,dltk in eclipse. I dont plan to code java though,lol.But because eclipse primarily act as java IDE at the 1st place, java capabilitie

  • Can't run RubyMine debugger with RVM, Ruby 1.9.2 and Rails 3 2011-03-16

    I've setup a fresh Ubuntu install and followed this guide to install RVM, Ruby 1.9.2 and Rails 3. Then I installed RubyMine 3.0, it automatically detected the Ruby 1.9.2 SDK from the RVM path, so that's ok. I can start the server perfectly (green pla

Copyright (C), All Rights Reserved.

processed in 0.180 (s). 11 q(s)